Sat. Jun 25th, 2022
What size file do I use to sharpen my chainsaw


What size file do I use to sharpen my chainsaw?

Most standard chain is sharpened at 25-35 degrees for crosscutting wood and for ripping with the grain it’s best to use 10 degrees. So if you are cutting with the grain, you should be using 10 degree sharpened chain. They do make ripping chain that comes sharpened at 10 degrees for cutting with the grain of a log.

What is the correct file size for .325 STIHL chain?

325″ Pitch Saw Chains. STIHL Files come specifically designed for each pitch of saw chain, with this particular round file suited for use with a . 325″ pitch chain. The file size is 4.8mm x 200mm.

What angle do you sharpen a 3/8 chainsaw chain?

What degree do you sharpen a 3/8 chainsaw chain? If you don’t know, or cannot figure out which chain you have, you can use the ‘default’ angles that most shops will use when sharpening chains that customers bring in: 30° / 60° / 0°, with a 0.025″ depth gauge offset.

How do you sharpen a chainsaw with a STIHL file?

Answer: My MS250 came with a . 325 chain which is a 3/16″ round file. You will need the sharpener for that one.

Do Stihl chains have a down angle?

The Stihl box shows 90°on all their chains.

How many times can a chainsaw chain be sharpened?

A chainsaw chain can be sharpened up to 10 times, sometimes more, before the entire chain needs replacing. It’s mostly dependent on two things; the amount of wear your chain incurs and the amount of metal removed every time you sharpen.

What is full chisel chain?

Full chisel chain has square-cornered teeth which creates a fast, aggressive cut. However when used in hard, dry or dirty woods it can degenerate quickly. It is often preferred when cutting cleaner, green timber such as live pine or ash trees.

What is the difference between .325 and 3/8 chain?

The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.

Will a 3/8 chain fit a .325 bar?

That takes care of the pitch on the bar because the Duromatic with its solid nose can run 404, 3/8 or . 325. With a Duromatic bar and a couple of rim sprockets (3/8 and . 325) you should be able to do it the way you want to.

What size chain does the STIHL MS 250 use?

Stihl 250 models use either a 0.050 inch, or a 0.063 inch gauge chain. The correct gauge measurement ensures that the chain neither binds nor fits too loosely in the bar.

What is the angle of Oregon chainsaw chain?

70º .025″ 3/8″ Low Profile. 90PX, 90SG.

How much does it cost to sharpen chainsaw chain?

A typical chainsaw can be sharpened up to 10 times before it’s time for a replacement. The cost to have a chainsaw sharpened ranges from $13 to $16. The average cost per chainsaw sharpening is $14.50 for people who choose to have their chainsaws professionally sharpened.

How do you measure the angle of a chainsaw chain?

Will this sharpener file 3/8″ chains not made by Stihl (like Husqvarna)? Answer: Yes this can be used on any brand chain.

How do you sharpen a Stihl carbide chain?

Use a diamond tool: As a carbide chainsaw chain is made from a really hard material, you need an even harder material to sharpen it: diamond. The most cost-effective method is to use a handheld grinder and a diamond stone. Or a diamond wheel, a file won’t touch it.

What size is my Stihl chain?

If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.

What does MS mean on STIHL chainsaws?

Every STIHL chainsaw model name starts with MS, MSA, or MSE. The common part, MS, stands for Motorsäge which is German for chainsaw. MSA indicates that it’s a battery chainsaw and MSE tells us that it’s an electric model.

How many horsepower is a 250 STIHL chainsaw?

How many horsepower is a 250 Stihl chainsaw? Stihl MS250 Gas Chainsaw with 18″ Bar and 3.0 HP.

How many cc is a MS250?

Get more done with this compact STIHL® MS 250 High Performance Compact Chain Saw. This chainsaw has an exceptional power-to-weight ratio, so you get great bang for the buck. Specifications: Displacement: 45.4 cc (2.77 cu.

How do you sharpen a chain saw chain?

Identifying STIHL Saw Chains

STIHL’s green and yellow color code system serves to identify STIHL bars and chains with different kickback reduction characteristics. Green (go) marks those products which are designed to reduce the risk of kickback injury and comply with the ANSI B175.

What angle do you sharpen a chainsaw with an electric sharpener?

Generally 55 or 60 degrees. This does matter for a file or a wheel and it’s essentially whether or not the tooth is filed flat (0 degree down angle) or with a slight tilt (10 degree down angle). Setting the tilt angle on a grinder style chainsaw sharpener.

Why does my chainsaw chain dull so quickly?

Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast. It won’t be hard to notice whether the wood that you’re cutting is dirty or not.

How long does a Stihl chain last?

How Long Do Stihl Chainsaws Last? Information we found online suggests that Stihl Pro Chainsaws have a run time of about 2,000 hours. That means the saw would last you for a minimum of 5.5 years before dying. Keep in mind this time is rated for professional chainsaws and not for regular homeowner saws.

How tight should your chainsaw chain be?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.

Why do loggers run upside down bars?

The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear. Using upside down chainsaw bars from time to time keeps your cuts more efficient and accurate.

What is the fastest cutting chainsaw chain?

A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).

Is semi chisel or full chisel better?

If you are looking to get the job done quick then a full chisel chain is the answer, however, you need to bear in mind regular sharpening and tools are required as they get dull very quickly. On the other hand, a semi-chisel wears better meaning you don’t have to sharpen it as often.

What does 72 mean on a chainsaw chain?

Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches – 1/4″ is the smallest, 3/8″ is the most popular, and 3/4” is the largest.

Does pitch matter on a chainsaw chain?

Yes, pitch does matter. If you change to . 325 chain you will also need to change the drive sprocket. If the saw has a floating rim then just change that, otherwise it is a new drum which may not be available.

What chain does a Stihl MS 310 take?

3-Pack 20″ Full Chisel Saw Chain for Stihl MS 310 Chainsaws – (20 inch, 3/8″ Pitch, 0.050″ Gauge, 72 Drive Links, CSC-D72)

What is the biggest bar you can put on a Stihl MS250?

Stihl recommends that its MS 170, MS 171, MS 180, MS 181, MS 192 and MS 211 homeowner models be equipped with guide bars between 12 and 16 inches. The MS 250 and MS 251 models are equipped with larger 45 cc engines and are capable of driving an 18-inch bar.

What size chain does a Stihl Farm Boss use?

Place the file at a 90° angle to the rollers on the filing gauge. File with both hands. The file should rest on both rollers. File the cutting tooth away from you with smooth strokes.

How do you sharpen a chainsaw blade with a grinder?

A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.

Does the chainsaw teeth sharpener really work?

This product does not work. Don’t waste your money. There are no directions with it and it opens up just as soon as you apply the necessary pressure to make the sharpening happen. I will be returning it to Amazon!

How do I know if my chainsaw chain is dull?

When cross cutting (against the grain of the wood) a dull chainsaw chain creates fine sawdust instead of coarse strands. The saw is producing smoke even when your chain is oiled and the chain tension is correct. The chainsaw produces an uneven cut. This could mean that your chain has dull cutting teeth on one side.

What is the best angle to sharpen chainsaw chains?

Most standard chain is sharpened at 25-35 degrees for crosscutting wood and for ripping with the grain it’s best to use 10 degrees. So if you are cutting with the grain, you should be using 10 degree sharpened chain. They do make ripping chain that comes sharpened at 10 degrees for cutting with the grain of a log.

What size file do you need for a 3/8 chain?

Simply put, the type of chainsaw file you need directly corresponds with the size of your chain pitch. The larger the pitch will mean the higher the cutting teeth will be. The higher the teeth will therefore mean the larger the file will need to be.

Are carbide chainsaw chains better?

Now on to life, the few people that use them “claim” 4 to 5 times the life of a regular chain. They can take a lot more of a dirty environment than a normal chain. But carbide will dull just like anything else, if you hit rocks or the dirt very briefly you might not tell much difference.

Can you sharpen tungsten chain?

Diamond files are suitable for sharpening tungsten-carbide tipped chains. Due to their high-quality diamond coating, these files will last hundreds of tooth sharpens. Diamond files will also sharpen regular steel chain that has been degreased and cleaned.

What size file do I need for a STIHL 250?

Answer: My MS250 came with a . 325 chain which is a 3/16″ round file. You will need the sharpener for that one.