Sat. May 28th, 2022
What kind of snake do plumbers use


What kind of snake do plumbers use?

A standard household drain snake, sometimes called a drum snake or top snake, is the smallest of the drain-clearing augers. It is primarily used for clogs in tubs, showers, bathroom sinks, washing machines, and sometimes kitchens sinks. Most have a 25- or 50-foot cable with a corkscrew tip for snagging debris.

Can an auger break a pipe?

If these types of snakes aren’t powerful enough to unclog the drain, then it may require a professional. Most heavy-duty augers that rely on electrical power are much more likely to damage your pipes if not used properly.

How do you use a pipe auger?

Augers work well for larger pipes like your toilet or shower drain. Pipes larger than 4 inches don’t typically clog, but if they do, they usually require replacement or the use of a mechanical auger.

What is the difference between a snake and an auger?

It’s the Size of the Drain Being Cleared

Drain snakes work for smaller drains like your kitchen or bathroom sink. Drain augers tackle larger pipes like your toilet or shower drain. The snake covers lines from 1-1/4″ – 2″ range, and you’ll use an auger for lines in the 1-1/2″ – 3″ range.

What is the best snake to unclog a toilet?

The answer is YES, as clogs or blockages occur in drain pipes water backs up inside behind the blockage and can cause a pipe to burst, or slowly leak through seals and joints.

Can snaking damage pipes?

While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are galvanized, or coated in zinc, which was done to prevent the pipe from rusting or corroding.

How often should you snake your drain?

ANNUALLY. Even if you don’t notice any specific signs that your drains are having trouble with clogs, you should do your best to have them cleaned at least once every year.

How do you use auger snake?

So if you’ve tried a plunger, a hot-water flush, or even a homemade baking soda solution and things still aren’t flowing like they should, it’s probably time summon the snake (also known as a plumber’s auger).

What if snaking a drain doesn’t work?

If your snake isn’t unclogging your drains it could be because the thumbscrew is loose, the clog is too severe, or the auger is dirty, for example. A drain snake (also known as an auger) is a simple, inexpensive necessity for every homeowner. But a broken or faulty auger can be extremely frustrating.

How do you unclog a drain if a snake doesn’t work?

When a drain clogs completely, don`t use a chemical drain cleaner–if it doesn`t work, caustics trapped in the pipes can be dangerous. In most cases, a rubber plunger can effectively remove the clog. Use a plunger with a head or cap big enough to cover the blocked drain opening completely.

How do I snake my main drain?

If you’ve got a clogged toilet, opt for a toilet auger. They’re specifically designed to handle tough clogs in plumbing. You should only use a drain snake if an auger just isn’t an option. But if you’ve got a sink or bathtub clog, put the auger away.

What is toilet auger?

A toilet auger is a specialized form of drain snake. Like other types of drain snakes, it has a handle that rotates a flexible metal cable that can bore through drain clogs.

Is it safe to use a toilet auger?

Be Careful With the Auger’s Tip

The tip of an auger can leave unsightly scratches in your toilet’s porcelain finish. Carefully guide the tip into the pipe and avoid making contact with the bowl.

What happens if you flush a snake down the toilet?

If even the thought of toilet snakes sends chills down your spine, take heart; while it’s certainly possible for a snake to end up in your toilet, it’s extraordinarily unlikely.

How do you get a toilet auger unstuck?

The main thing you can do for your plumbing system is to clean drains once a week. This can be done easily with a little baking soda and apple cider vinegar. Simply pour the two substances down the drain and let it foam up before flushing the toilet. This will clear out any small clogs forming in your system.

Can a drain snake break a PVC pipe?

If the bottom of the pipe or fittings are missing this can cause the snake to catch and break the pipe. It can also cause the equipment to get stuck. Broken PVC pipe is another issue with drains.

How do you snake a shower?

Put in your drain stopper, turn on the hot water and let it pool in the sink. Add one cup of baking soda and two cups of vinegar to the water and remove the stopper. The hot water, baking soda, and vinegar will flow down the pipes and help eliminate minor clogs.

How far does a toilet snake go?

Closet augers are typically made with about 25 ft. of reach, so you might need to crank for a while depending on how far down your clog is. When you feel the cable come up against some form of resistance, that means you’ve reached the clog and can stop cranking.

Can you use a snake on PEX pipe?

You can install PEX as you would a traditional copper system, where a larger-diameter pipe supplies water to all the fixtures as the large line snakes through the house. Or you can install a separate water line from a manifold to each fixture.

What is foam SAN for?

Chemstar Foam San is a broad spectrum disinfectant and foaming sanitizer for floor drains. A foaming liquid formulation, it is a small fly ovicidal treatment that can quickly and easily be applied to carry active ingredients into drains that kill bacteria and small fly ova.

Why does my main drain keeps clogging?

Grease, fats, and oil are all some of the biggest culprits when it comes to clogging lines. It’s NEVER a good idea to pour grease, oil, or other fats down a drain. Always pour hot grease into a coffee can or jar. Once it solidifies, you can throw it away.

What happens if you use too much Drano?

Drano has the full potential to damage a pipe if left for too long. Drano dissolves and breaks down even the most stubborn clogs by producing a lot of heat. This heat is responsible for degrading and damaging pipes if left for too long, especially those that are made of plastic or metal.

How do you get a drain snake past a trap?

Coke. Coke is a lesser-known fix you can find in your refrigerator. Pour a 2-liter bottle of cola — Pepsi, Coke, or generic brand substitutes — down the clogged drain. Coke is actually quite caustic and effective at clearing away buildup in your drains, but it’s far milder than commercial drain cleaners.

Will Coca Cola unclog a toilet?

Coke and Pepsi are loaded with phosphoric acid, which breaks down buildup that can clog your drains! Phosphoric acid can even remove lime scale and other tough buildup that regular cleaners struggle with. This is an effective and refreshing home remedy if we ever saw one!

Why pour hydrogen peroxide down drain?

Using Hydrogen Peroxide on a Clogged Drain

Hydrogen peroxide dissolves organic matter to loosen and flush away debris such as skin cells. It also disinfects the drain as it works by reducing germs inside your pipes and making your sinks smell fresh and clean.

When should you not use a plunger?

You’re Ready to Take the Plunge

Plunger, that is. DON’T use the plunger if you poured chemical drain opener into the drain. The toxic liquid could splash your skin and cause a chemical burn. DO block the overflow drain with wet dishcloths.

What chemical will unclog a toilet?

Pour 1 cup baking soda and 2 cups vinegar into the toilet.

The baking soda and vinegar create a chemical process that help to dissolve clogs. Distilled white vinegar is commonly used, but any type of vinegar will work. The mixture will fizz a great deal.

Can plunging make a clog worse?

Plungers are an effective way to clear a drain or unclog a toilet when used correctly. The key is to make sure a tight seal is formed around the drain and plunge slowly and methodically. Plunging too quickly or with too much force can prevent a tight seal from forming, making your efforts relatively ineffective.

Can a toilet snake get stuck?

Generally, it is about 3 feet long. As the snake is extended down the drain, the auger may catch on the material clogging the toilet. The clogging material then may be pulled up as you rewind the tubing, or dislodged as you poush forward, so it may be flushed away.

How do I unclog my main sewer without a cleanout?

All you need to do is take a cupful of baking soda and pour it down the drain. Consequently, pour a cupful of white vinegar down the same drain. Thereafter, wait for around 10-15 minutes for the baking soda and vinegar solution to break up and clear the clog.

How do you get a snake past the bend in the pipe?

The proper way to use a snake is to insert the head into the drain and push very slowly without cranking. If you try to force it, it can bend back on itself and actually come out of the drain. Push gently and slowly, and if the auger is the right one for the job, it should slide smoothly through the pipe.

Why is my drain auger not turning?

Failure to tighten the thumbscrew is a common reason behind drain snakes that are not working. You must make sure that the thumbscrew that secures the cable inside the drum or handle is securely tightened. If it is not, the cable will not rotate at all when you twist the handle.

Is my main sewer line clogged?

For smaller clogs, snaking your own drain is possible. Routine, minor sink clogs from hairballs or food remnants are typically located in the U-shaped trap directly below the sink or only a few feet deeper in the drainpipe. They may be cleared by using a light-gauge, hand-operated auger.

Can I unclog a sewer line myself?

It is possible to unclog drains yourself, but it can lead to more problems. Therefore, it is a good idea to call a professional plumber. A professional drain contractor can inspect your system and clean it.

How do you know if your sewer line has collapsed?

Toilet Auger

With a length of 3 to 6 feet, they have a “J” shape that allows them to be easily fed through the toilet. The devices are hand-operated. The cable should be 1/2 to 5/8 inch in diameter. Toilet augers are specially designed not to scratch a toilet’s finish.

What is the difference between a snake and an auger?

It’s the Size of the Drain Being Cleared

Drain snakes work for smaller drains like your kitchen or bathroom sink. Drain augers tackle larger pipes like your toilet or shower drain. The snake covers lines from 1-1/4″ – 2″ range, and you’ll use an auger for lines in the 1-1/2″ – 3″ range.

Can you use a drain pipe auger on a toilet?

Plumbing snakes (also called drain cables) that are used to unclog sinks can actually scratch your porcelain toilet bowl. If plunging did not work, you want a toilet auger (also sometimes called a closet auger). The auger is a plumbing snake, but it has a protective sleeve that protects the bowl from damage.

What keeps snakes away from the house?

No, it is not an effective repellent. Snakes will not drink diesel and will not die after inhaling the fumes. The exception to this rule is if they have ingested enough to reach a level of toxicity. While snakes have a strong sense of smell, there is no known chemical that definitively repels them.

Can snakes climb walls?

The answer is that yes, some species of snake are excellent climbers, and can climb walls. But not just any wall. The snake must have something to grab ahold of and push off of. Not even a rough surface will do – snakes can’t “stick” to walls the way insects, rats, and lizards often do.