Sun. May 22nd, 2022
What kind of scan tool does Scotty Kilmer use

What kind of scan tool does Scotty Kilmer use?


FOXWELL NT301 OBD2 Scanner Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light.



What scanner does Toyota use?


The Toyota/Lexus current factory tool is the laptop-based application called ‘Toyota TechStream‘. This package was introduced to the Toyota/Lexus dealers as a replacement for the hand-held Vetronix built ‘Toyota Mastertech’ factory scan tool.



What is BlueDriver sensor?


BlueDriver OBD Scanner & App

The BlueDriver device is compact in design and connects to your phone via Bluetooth to continuously monitor its health and diagnose a wide range of error codes with ease. BlueDriver also comes with a free app for iOS and Android that is easy to use and translates codes into simple terms.



What code reader will read transmission codes?


Computed tomography is commonly referred to as a CT scan. A CT scan is a diagnostic imaging procedure that uses a combination of X-rays and computer technology to produce images of the inside of the body. It shows detailed images of any part of the body, including the bones, muscles, fat, organs and blood vessels.



Can a code reader mess up your car?


Apart from some “killer commands”, the ECU might have been destroyed electrically. The OBDII-Interface can implement several different data buses with different voltage levels. If the bus lines get connected to 12V, this could destroy something.



Which OBD scanner is best for hybrid cars?


If you are looking for the best OBD2 scanner that is affordable and covers all systems on Toyota and Lexus vehicles, the iCarsoft TYT II Scanner is our top pick. You can recover this scanner’s cost the first time you use it to diagnose the check engine light on your vehicle.



Which method can be used to reprogram a PCM?


Reprogramming a powertrain control module​ (PCM) can be done by downloading new calibration files from a personal computer​ (PC) onto the​ PCM’s memory.



What is Mode 6 on a scanner?


Mode 6 is defined as test results and other component/system monitoring. The vehicle runs self tests on its various systems and components to determine everything is running within the operational standard.



Can you code with BlueDriver?


It works with most any car made in the last few years. As I have a few cars including a 2018 m4, it would be delightful to use one tool for a number of cars.. plus it looks substantially more powerful than bimmercode.



Can FIXD detect transmission problems?


You can use FIXD’s live data feature to help with this. If the timing of the noises lines up with the timing of the shifting periods, it could be your transmission.



Does BlueDriver read transmission temp?


Unfortunately transmission temperature is not part of the OBDII standard live data set and is not currently supported by BlueDriver.



Can you check your transmission?


Pull out the dipstick, wipe it clean, replace it slowly, and then pull it back out. Check the fluid level—how high the fluid comes up on the dipstick—against the “full” and “low” or “fill” marks on the dipstick. The color of transmission fluid can tell you a lot about the health of your car’s transmission.



Are CT scans harmful?


Are There Any Risks? CT scans use X-rays, which produce ionizing radiation. Research shows that this kind of radiation may damage your DNA and lead to cancer. But the risk is still very small — your chances of developing a fatal cancer because of a CT scan are about 1 in 2,000.



Why CT scan of brain is done?


Brain CT scans can provide more detailed information about brain tissue and brain structures than standard X-rays of the head, thus providing more data related to injuries and/or diseases of the brain. During a brain CT, the X-ray beam moves in a circle around the body, allowing many different views of the brain.



What organs are seen on a CT scan of abdomen and pelvis?


A CT scan of the abdomen and pelvis can help diagnose problems in the bladder, uterus, prostate, liver or bowels. This procedure is typically used to help diagnose the cause of abdominal or pelvic pain. It is also used to identify diseases of the internal organs such as: Appendicitis.



Can I scan OBD2 while driving?


It’s completely safe to leave an OBD2 scanner tool plugged in while driving. In fact, it’s important to have your car running while you diagnose an engine code to avoid damaging the scanning software.



CAN OBD drain battery?


Battery Drain

So a poorly designed OBD device, when left plugged into the OBD port, might completely drain your battery. Worse still, if a device is not carefully designed, it can turn on your ECU even while the car is not running, draining your battery even faster.



How do I remove OBD scanner?


First remove the housing by reaching behind, pinching the sides and pushing it towards the floor. Once that part is out, the piece will be dangling by the wiring harness. Now the actual port can removed from the plastic housing by pulling the harness backward out of it (i.e. up, towards your dash).



What is the difference between OBD and OBD2?


OBD is the abbreviation for on-board diagnostics. OBD2 refers to the second generation of the onboard diagnostic system. OBD or onboard diagnostics is the system in a car that controls and monitors all the important control devices, offering data access with the appropriate hardware and software.



What does OBD stand for?


OBD II is an acronym for On-Board Diagnostic II, the second generation of on-board self-diagnostic equipment requirements for light- and medium-duty California vehicles.



Are OBD scanners worth it?


No it is not worth the cost. If you live in the states almost all major auto parts chains (Advance Auto, Autozone, etc) will do a check or even loan you the tool for free. Unless you’re checking codes daily, it may be cost prohibitive. The error codes produced by OBD2 are rather generic.



What cars work with OBD2?


All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped. In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995.



What does ISO 9141 mean?


ISO 9141. The ISO 9141 standard refers to the communication protocol used by DaimlerChrysler, Honda, and Toyota. This protocol has been used since 1996. With the ISO 9141 protocol, each bit of information is 96 us long and has two voltage levels to represent a logic 0 or 1.



What type of OBD is my car?


The standard OBD2 interface is a 16-pin connector. OBD2 interfaces are the same, so if the interface has 16-pin connector, so your car is OBD2. If it looks different, your car is OBD1. The OBD interface is usually located somewhere on the dashboard of the car.



Can I flash my own PCM?


Flash reprogramming PCMs is NOT for the feint of heart. First, you have to have a scan tool or J2534 device that can reprogram your vehicle’s computer. Then you have to go to the vehicle manufacturer’s service information website, pay an access fee and find the correct update for your vehicle.



What causes PCM failure?


Environmental Factors

Water is the primary element to avoid as exposure to it can render the PCM irreparable. Other environmental factors that could lead to PCM failure include thermal stress due to excessive heat and excessive vibration that causes sensitive parts to fail.



How do you reset an engine control module?


The Test ID (TID) tells us what specific test is being run. The Test Value is the actual result of the test.



What are TID and CID codes?


“TID” stands for “test identification” and “CID” stands for “component identification”; CAN vehicles use MID (monitor ID) and TID (test ID). The number values are “computer” values and mean nothing to me as a tech. In this example, the hexadecimal values have already been converted to decimal values.



Can BlueDriver test alternator?


If the vehicle’s ECU is reporting charging system related codes BlueDriver will read them, otherwise you can also monitor alternator voltage using the “Control Module Voltage” datapoint if it is supported by your vehicle – what do you have? 1 of 1 found this helpful.



Can BlueDriver bleed ABS?


No, its a diagnostic help tool It will remove codes after you do the correct repair. Do you find this helpful? Do you find this helpful?



Is BlueDriver bidirectional?


As for bringing BlueDriver up to the same level as the full-featured, tethered scan tools, it’s not far off. “Bi-directional communication is something BlueDriver already has the capability to do,” confides Browne.



Does BlueDriver work on diesels?


It will work with diesel engine, except unfortunately the 7.3 powerstroke, it is not fully OBDII compliant and some standard diagnostic commands can cause unexpected issues such as stalling, ecm freezing/crashing, etc – as a result it is not currently compatible with BlueDriver.



What can BlueDriver do?


The most broadly useful feature of BlueDriver is Smog Check. No, this is not a full smog test of your car. Rather, the app looks at engine data which might cause a car to fail a smog test. Not only does it look for the Check Engine light and error codes, but also examines engine compression and spark data.



Will BlueDriver work with Mercedes?


Look, I’m gonna give it to you straight, the Lemur Motors Bluedriver is the best OBD2 scanner for Mercedes for a couple of reasons, but it’s also the most expensive (compared to other scanners). Here’s why I recommend this scanner to everyone that asks which diagnostic tool they should choose.



Does FIXD charge a monthly fee?


No, you do not need the subscription to use your FIXD sensor. The subscription does come with additional features, but scanning your vehicle will always be free.



Does FIXD have a monthly fee?


FIXD Premium is our optional upgrade to the FIXD Sensor and free app. For only $69/year, members have the ability to talk to a FIXD Mechanic, get guaranteed cost estimates for repairs, & more.



Is there a monthly fee for FIXD?


After 7 day trial period, unless you cancel, membership is billed annually at $69.99. Risk Free.



Can BlueDriver check battery?


Introducing the Service Feature! BlueDriver. BlueDriver 7.2 is here, and with it comes some great new capabilities! The new Service feature will help you reset an oil light or TPMS light, or register a battery.



Can blue drivers read wheel speed sensor?


Currently, BlueDriver does not support Enhanced Live data (ex. Wheel Speed Sensor), however it will read any trouble codes if they exists for your vehicle.