Wed. Oct 5th, 2022
What is a universal socket set

What is a universal socket set?

A universal socket or universal wrench socket resembles a standard deep socket but features many small metal pins in its head. The pins make the socket compatible with a high range of fasteners, including bolts and nuts.

Are ratchets universal?

Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets.

Do all ratchets fit all sockets?

Not every socket works for every job, even if it’s the right size. If you’re working in a tight space or on a difficult project, you may need a special socket length or type to get the job done efficiently. Some special features also make working with ratchets and sockets easier.

Are universal socket wrenches any good?

The benefit of this type of tool is that you won’t need to purchase a bunch of separate tools when working with different types of fasteners. Most universal sockets are able to grip everything from square nuts to hex nuts to eyehooks. They also remove nuts and bolts that have been stripped or worn down.

What are U joint sockets used for?

Universal Joints, or Universal Joint Sockets, are used with a ratchet or other socket driver to drive sockets at an angle. This is often very useful in applications with confined or awkward spaces.

Who invented the universal socket?

A great example of this is the Gator-Grip® universal socket invented by Joel Marks (my brother) of WorkTools, Inc. (I’m a partner). The Gator-Grip® is a 3/4″ deep socket with a set of 54 spring loaded pins that grip a wide range of fasteners.

Is a socket wrench the same as ratchet?

A ratcheting socket wrench – commonly known as a ratchet – is a mechanical tool that tightens and loosens nuts and bolts more efficiently than other wrenches. Ratchets attach to different sized sockets, making them a versatile tool for your toolbox.

How deep is a deep socket?

Drive, 6″ Long.

Are impact sockets different?

The wall of an impact socket is around 50% thicker than that of a regular hand tool socket, making it suitable for use with pneumatic impact tools, whereas regular sockets should only be used on hand tools. This difference is most noticeable in the corner of the socket where the wall is thinnest.

How do I choose a ratchet?

A lot of common coarse ratchets sport 36 teeth, which gives you a 10-degree swing arc. Fine, or high-tooth-count, ratchets range from about 72 teeth to 160 teeth.

Does the Gator Grip socket work?

Overall Take

In our analysis of 10 expert reviews, the RAK Multi-Function Universal Socket Grip placed 1st when we looked at the top 10 products in the category.

How do you use universal joints?

ball-and-socket joint, also called spheroidal joint, in vertebrate anatomy, a joint in which the rounded surface of a bone moves within a depression on another bone, allowing greater freedom of movement than any other kind of joint.

What is a wobble socket?

The wobble feature enables you to reach and turn fasteners that are obstructed and can only be reached at an angle. It allows up to 15 degrees offset. Spring-loaded ball detent holds sockets securely in place. When fully inserted (not at an angle), the extension bar locks into a regular rigid extension bar.

Who made the first ratchet?

Summary. English: Engraving of the first ratcheting socket wrench and two sockets, invented by J. J. Richardson and patented on June 18, 1863, from the article about it in Scientific American magazine.

Who invented ratchets?

You have probably heard of the quick-release ratchet wrench. But you may never have heard of Pete Roberts, the guy who invented this clever tool in the early 1960s. Four decades later he has come up with its counterpart, a line of ratchets, extensions and drives that keep the sockets from falling off accidentally.

When did the Gator Grip socket come out?

The Original Gator Grip made in USA since 1997.

What are the different ratchet sizes?

Typically, a small lever on the ratchet head switches the wrench between tightening and loosening mode. These drive fittings come in four common sizes: 1⁄4 inch, 3⁄8 inch, 1⁄2 inch, and 3⁄4 inch (referred to as “drives”, as in ” 3⁄8 drive”).

How do you use a socket without a ratchet?

Most torque wrenches look like a larger version of a ratchet — in fact, it often also has a ratchet mechanism. The purpose of a torque wrench is to measure the precise amount of pressure you use to tighten down a bolt.

How are 12 sockets measured?

In the current market, socket sizes are divided into two systems: SAE (imperial, measured in inches) and metric (measured in millimeters). Both 6-point and 12-point sockets are measured using these two systems. The popular range is 5.5~24mm.

What is socket length pile?

The depth up-to which the RCC end bearing piles must be penetrated within the Hard Rock is known as the socket length. Example : The hard rock is available at a depth of say 10m from ground level. If it’s a 450mm dia pile, the actual excavation shall be done for. 10000 450 mm =10450 mm.

What is the OD of a 1/2 socket?

Impact sockets are typically black. This is because the surface is carbonized in order for it to harden. Ensuring that the surface is hard allows the sockets to absorb sudden torque changes i.e. “impact” a lot better.

Which is stronger chrome molybdenum vs chrome vanadium?

Chrome molybdenum, also called Cr-Mo or chromoly, is a type of steel made from combining chromium, molybdenum, iron, and carbon alloy elements. It has stronger impact resistance, strength, and toughness than chrome vanadium, so it is typically used for tools like impact sockets.

Can you use regular sockets with air ratchet?

On the other hand, air ratchets can use regular sockets as they do not deliver higher torque levels. This, in turn, allows the user to use standard sockets as they know they won’t break under any circumstance.

Are quick release ratchets weaker?

Ratchets without quick release mechanisms still have ball detent retention mechanisms, but require more pulling to remove a ratchet. Those with quick release mechanisms might have stronger retention, until you press that release button even just a little bit.

What ratchet has the most teeth?

Steelman™PRO 160 tooth ratchets have the highest tooth count available on the market! With 160 teeth, the ratchet only requires a 2.25 degree swing.

What order do standard sockets go in?

Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)

What are the most common socket sizes?

Answer: Generally, the most common socket sizes are the 10mm and 36mm ones. In the SAE size, it’s around 13/32” for the 10mm ones. They’re the most common socket sizes used for screws.

What are the types of sockets?


Snap-on ratchets have the strength you need to bust loose rusted and seized fasteners, the precision of a 80-tooth mechanism for superior ratcheting action and the durability of patented sealed mechanism for permanent lubrication.

Is Kobalt made by Snap-on?

Kobalt Tools History & Manufacturing

In 2003, the Danaher Corporation took over the manufacturing of Kobalt tools as J.H.Williams became Snap-On Tools. In 2011, Lowe’s again switched manufacturers to J.S. Products of Nevada, which still makes the tools today.

What does 72 tooth ratchet mean?

It Don’t Mean A Thing If It Ain’t Got That (Arc) Swing. For one thing, a 72-tooth ratchet needs a 5° swing arc for the pawls to catch and allow you to turn your bolt, whereas a 120-tooth number will only need 3°.

How much torque can a universal socket handle?

What tends to be beneficial in many ways – the torque power can handle up to 140 pounds – so removing a rusted nut or bolt will not be a problem. I really like how it can grip pretty much any nut or bolt that needs to be changed, and whether it be for personal or professional use, it works well in both ways.

Does Gator Grip work on stripped bolts?

Although they work ok for stripped heads if they aren’t too tight. You can’t use them to to break a bolt loose.

How do you use an alligator grip?

In this configuration, the angular velocity of the driven shaft will match that of the driving shaft, provided that both the driving shaft and the driven shaft are at equal angles with respect to the intermediate shaft (but not necessarily in the same plane) and that the two universal joints are 90 degrees out of phase …

Do FWD cars have u-joints?

Front-wheel drive (FWD)

Instead of having a long driveshaft like on a rear-wheel vehicle, all the drivetrain components are in the front of the vehicle. Rather than using universal joints, this setup uses constant velocity (CV) joints.

How are universal joints made?

A universal joint is a connection between two objects, typically shafts, that allows relative rotation in two axes. It is made up of two revolute joints with perpendicular and intersecting axes.

What are ligaments?

A ligament is a fibrous connective tissue that attaches bone to bone, and usually serves to hold structures together and keep them stable.

What is a cartilage?

Cartilage a strong and smooth substance made up of “chondrocytes,” or specialized cartilage cells, that produce a matrix of collagen, proteoglycans (a special type of protein) and other non-collagenous proteins. These materials help cartilage attract water and give it its shape and specific properties.

What is a hinge joint?

A hinge joint is a type of synovial joint that exists in the body and serves to allow motion primarily in one plane. [1] The hinge joint is made up of two or more bones with articular surfaces that are covered by hyaline cartilage and lubricated by synovial fluid.

What is a swivel socket?

A swivel socket is a specially designed metal tool that is used for tightening or loosening bolts. The head of the socket swivels in different directions to allow a user to access bolts in tight spaces or at awkward angles.