Fri. Dec 2nd, 2022
How do I know what type of cabinet hinge I need


How do I know what type of cabinet hinge I need?

The construction of your cabinet – most notably, the overlay of the face frame and the cabinet door – determines which cabinet hinge you need. Similarly, where your drawer slides need to be mounted dictates what type of drawer slide you need.

Which type of hinges are best for kitchen cabinets?

Another way to look at door overlay: If your door is 30″ wide and the opening is 28″ wide then then you could calculate your overlay as 30 minus 28 divided by 2 equals 1″. Divided by two because the overlay is measured on one edge, the hinged edge of the door.

How do I choose kitchen cabinet hinges?

You should check the diameter of the hole in the door that your current hinge sits in – these are usually 26mm, 35mm or 40mm for larger hinges. It’s important to measure the hole in the door and not the hinge itself as the hinge may be slightly smaller.

What is a overlay hinge?

An Overlay hinge is also just how it sounds, it allows the cabinet door to lay over the frame slightly, or even all the way. An overlay hinge can be completely concealed, or it can be Semi concealed, where the hinge is visible when the cabinet door is closed.

What is the difference between inset and overlay hinges?

The main differences between inset and overlay hinges are their cost, style, and usage. Inset hinges are often decorative, more expensive, and used for inset cupboards. Overlay hinges are less visible, cheaper, and used for overlay cupboards.

What are the types of hinges used in modular kitchen?

Sleek holds a market experience for more than 20 years, it’s strict quality checks make sure that only the best hinges are installed in your home. It’s important to note that Sleek does not offer any innovative hinge designs like Hettich as most of Sleek’s hinges are designed especially for kitchen cupboards.

What is the strongest type of hinge?

Ball Bearing Hinge

Ball bearing hinges are considered heavy-duty and durable, making them ideal for entry doors.

What is the difference between standard overlay and full overlay cabinets?

A Standard Overlay door will lay on top of (overlay) this 1.5” face frame 3/8”, leaving 1-1/8” revealed on all rails and stiles. A Full Overlay door will overlay that same 1.5” face frame 1.25”, leaving a ¼” reveal on the sides (stiles) and bottom (rail).

What is full overlay vs half overlay?

Partial overlay cabinets cover most of the cabinet frame but leave space between the drawers and doors. This is typically the least expensive cabinet option and is a top choice for people who want to leave off hardware. Full overlay leaves no space between each door/drawer and thus requires hardware.

What is a cabinet overlay filler?

A filler is a piece of finished wood used to “fill” openings or gaps between cabinets, or a cabinet and any obstruction, that would inhibit the doors or drawers from fully functioning.

What does 1/2 inch overlay hinge mean?

1/2″ overlay hinges are the most common overlay of cabinet hinge. These are used in face frame cabinets where the door covers a 1/2″ of the face frame all the way around the cabinet door. 1/2″ overlay hinges are the most common overlay of cabinet hinge.

Can you replace old cabinet hinges with soft close?

It is possible to convert a cabinet with a soft close to stop the loud noises associated with opening and shutting your cabinets. You can often purchase a small adapter and install it within minutes to fix the problem, but you must know which model to purchase and how to install it.

What are European cabinet hinges?

European style hinges are a modern high-tech hinge for cabinets. European hinges may also be commonly referred to Blum or Grass hinges, as these are two of the main manufacturers of this type of hinge. They are typically comprised of two parts: the hinge and the mounting plate.

What is standard cabinet overlay?

Standard Overlay Cabinets

The standard overlay is the most commonly found kitchen cabinets with doors covering the entire front surface. This design allows for more storage space as it covers up what would otherwise be wasted space between cabinets and offers an overall cleaner appearance.

What is overlay on kitchen cabinets?

Cabinet overlay means the correlation of your cabinet doors to the cabinet face frames. This overlay affects how much of the cabinet frame shows and can change the appearance of your space from traditional to a contemporary-style kitchen.

How do you install cabinet door hinges overlay?

Inset Cabinet Doors are set into the cabinet frame and fit flush with the face of the cabinet when closed. Since the door is flat with the rest of the cabinet, a door pull or knob is needed to open the cabinet. With this type of door, the hinges can either be concealed or exposed.

Are inset cabinets more expensive than overlay?

Inset cabinets can cost approximately 15-30% more than overlay cabinets. You can also lose some storage space for those larger dinner dishes in inset cabinets.

What hinges to use for inset doors?

Full inset doors use either butt hinges or surface mounted cabinet hinges, such as H and HL hinges or strap hinges.

Which type of hinges are best for wardrobe doors?

To ensure a peaceful closing of the wardrobe doors, the soft-closing hinges are the right ones to go for.

What are the 4 styles of hinge called?

Butterfly hinges, also called surface mount cabinet hinges or dovetail hinges up, attach to the outside of cabinet doors so the entirety of the hinge is visible when the door is closed. Butterfly hinges are so named because of their ornamental, mirror-image leaves, or wings.

What is Parliament hinge?

Parliament and Projection hinges are typically used to allow doors to open fully up to 180 degrees, often a pair of doors dividing rooms or pairs of French Doors. These days they are generally made form brass or stainless steel, plain steel parliament hinges are a thing of the past.

What is a reveal on a cabinet?

Door reveal refers to the portion of a cabinet frame left exposed after the door is attached. The size of your reveal is determined by the size of your doors in relation to your cabinet case frame.

Are full overlay cabinets worth it?

The Pros of Full Overlay Cabinets

They’re a good alternative to inset cabinets for tighter budgets. More Storage: Because the doors are mounted on the face frame instead of inside it, there’s more room to squeeze large items through the opening than in inset cabinets.

What size overlay hinge do I need?

The correct determination for full overlay is typically 3/4 inch on all sides. For example, if the door opening in the cabinet face frame is 12 by 18 inches, the size for a full overlay door would be 13 1/2 by 19 1/2 inches.

Is full overlay worth?

Since they are not set inside the cabinet frame, full overlay provides the greatest amount of storage with ample room for items such as pots and pans. Double doors in full overlay style come without the vertical stile on the face frame which allows for even better storage capacity and easier access of stored items.

What is a cabinet filler?

A cabinet filler strip is a piece of wood inserted between two cabinets to allow factory-sized cabinets to fit a wall of any length. A filler strip can be placed between two cabinets or against the wall to “fill” the empty space between cabinets.

How do you fill the gap between kitchen cabinets and walls?

But don’t despair, you can make these gaps disappear fast and easy with a caulking gun and a tube of caulk. You can use a colored caulk matching either the cabinet or wall color or paint white caulk to give your kitchen a more detailed, seamless appearance.

How thick is cabinet filler?

You will need a minimum of a 1 1/2″ filler against the side wall for your pantry, and if it has pull outs, you’ll need a 3″ one.

What is a partial overlay hinge?

“Half crank” or partial overlay hinge

The partial overlay hinge is very similar to the inset hinge but is set back from the edge a little further than inset allowing the edge of the door to overlay the case partially. Use these for partial overlay doors.

How do you convert partial overlay cabinets to full overlay cabinets?

Adding soft close to your cabinets means you’ll never have to hear a door slammed again. These hinges will ensure the door shuts smoothly and silently. In addition, they also prevents fingers from being slammed in doors due to the door closing too quickly. This is a major bonus for families with young children.

Do all cabinet hinges need to be soft close?

In general one soft hinge is sufficient on majority of the door and closing habits. Two would provide more dampening and thus you can slam the doors harder with more satisfying effect.

What is a soft close hinge?

With soft close hinges, like self close hinges, the hinge will take over at some point during closing the door and pull the door shut. However, with soft close hinges, the door will shut quietly.

Do kitchen cabinet hinges wear out?

To bring the cabinets closer or further to the cabinet box, use the hinge screw farthest from the doors (the one not used for left/right). Keep in mind that while most hinges are adjustable, no hinge is immortal. All hinges wear down with time and use until they eventually require replacement.

What is a pivot hinge door?

A pivot door is a swinging door that rotates on a vertical axis, a spindle. This is different from regular hinged doors, where the hinges are attached to the side of the door and the adjacent wall. The difference between a pivot door and a regular hinged door.

What is the use of European hinges?

European Hinges: A type of concealed hinge especially popular on frameless Euro-style cabinets but also available for face-frame applications. European Hinges have a mounting plate that secures to the cabinet and a cup that seats in a (typically 35mm) circular mortise drilled in the back of the door.

What is the most common overlay for cabinet doors?

Most common are half and three-quarter overlays which, as you might expect, conceal half and three-fourths respectively of the cabinet frame.

How much overlay is a full overlay hinge?

A full overlay hinge will “fully” overlay a 3/4″ panel and a half overlay hinge will cover half of a 3/4″ panel. There are 4 factors to look at in order to determine your final cabinet door overlay: Overall Door Size.

Is full overlay more expensive?

The Full Overlay door is a more current design look and is a more expensive cabinet option because more wood is used to completely cover the cabinet boxes. Partial Overlay Doors, sometimes also called Standard, Traditional or Half Overlay..

What is the difference between raised panel and flat panel doors?

The center panel is raised above the rest of the door or drawer and there is usually a recessed border around it. Raised panel cabinets are often more detailed and intricate. On the other hand, recessed panel cabinets have a flat center panel with a raised border around it, which gives off a more sleek appearance.